UV Source Power Supply UV40A-PS

Quotation Inquiry

Application

The UV40A-PS power supply is intended to use with UV40A1 for ultraviolet photoelectron spectroscopy (UPS). Efficiently controlled He I / He II ratio by adjusting the helium pressure and by adjusting precisly discharge current in the power supply.

Description

The UV40A-PS can work with constant discharge current or discharge voltage mode, which gives the best operation conditions on UV source. Ignition the source is possible automatically from the power supply or manually directly from the source by piezo igniter. The parameters are shown on large LCD graphics display, and are set precisely by digital encoder. Built in Timer for setting the working time after which the unit goes to stand by. The process can be controlled by the computer via an RS-232 or RS-485 communication interface, and dedicated application.
The power supply UV40A-PS is mounted in the 19" rach (full-width, 3 units height) or free standing.

Software

Electronics can be controlled by PC with dedicated software or library.

Specification

Supply Voltage	110V or 230V, 50Hz or 60Hz
Output Power	250W max
Supply Voltage	110V or 230V, 50Hz or 60Hz
Output Power	250W max
Discharge voltage (Usource)	200-1000V, resolution 10V
Discharge current (Iemis)	5-300mA, resolution 1mA
Ignition voltage	10KV peak
User Interface	Large LCD graphics display Functions keys and digital encoder for editing precisely all needed parameters can be stored and recalled.
Communication interfaces (option)	EIA-232, 2 wire EIA-485, 4 wire EIA-485 specify at order
Dimensionds	483x133x380mm (WxHxD), 19" rack mountable or stand alone

This website is not an offer within the meaning of the Civil Code, and has information character only. Contact with our specialist before you order, please.