Effusion Cell EF 40C1

Quotation Inquiry

Description

The Effusion Cell EF 40C1 is a UHV component, designed for indirect resistive heating and used for getting highly constant evaporation rates.

Application

Highly reproducible and reliable. Suitable for use in any MBE system. Molybdenum-free construction. The EF 40C1 Effusion Cell is recommended for use with low to medium vapor pressure, meaning those materials that are likely to be evaporated or sublimed at temperature ~250° ÷ 1500°C.

Additional information

Crucibles - the medium temperature cell is available 5cc size. The most commonly used crucible materials are PBN, AL₂O₃; other materials may also be available
Integral manual or electro-pneumatic shutter – made of high purity Ta. Isolated from the crucible so that closing the shutter will interrupt the flux without disturbing the equilibrium within the crucible
Integral water cooling – the EF 40C1 is cooled by the water cooled copper block. The stainless steel inlet tube is soldered to the copper block. The outlet tube goes inside the inlet tube
Sample Heating Power Supply HEAT1-PS
Linear Shift (optional)

Specification

Heater	Ta wire
Thermocouple	Type C (W/Re 5/26%)
Typical operating temperature	250 ÷ 1500°C
Maximum outgasing temperature	1600°C
Temperature stability	± 1°C
Mounting flange	DN 40CF
In-vacuum O.D.	35 mm
In-vacuum length	As specified
Power consumption	~300W
Working distance	100 ÷ 150 mm
Degassing without water	500°C

Note:
Dimensions and ranges shown in specifications and drawings may be changed for an individual customer needs.

This website is not an offer within the meaning of the Civil Code, and has information character only. Contact with our specialist before you order, please.