Power supplies & heating controllers

X-ray Source Electronics Set XREC20

X-ray Source Electronics Set XREC20

Technical data


Supply voltage 110 or 230 VAC, 50/60 Hz,
(power consumption max 1800 W)
Emission current range (Ie) 0 - 100 mA, accuracy 0.1 mA
Anode high voltage range (UHV) 0.5 kV - 15 kV, accuracy 0.1 kV
Cathode current (Icath) 3A in Standby mode
up to 20A in Operate mode
Anode power limit 650 W
High voltage ramp 1 - 1000 V/sec
Emission curent ramp 0.1 - 50 mA/sec
Interlocks High vacuum
Cooling water (master)
X-ray cover
Communication Interface RS232/485, Ethernet
Communication protocol MODBUS-TCP
XREC20-I user interface 7" TFT display with touchscreen, digital encoder
Interface languages English, German, Polish
Dimensions XREC20-I 483 x 133 x 380 mm (W x H x D),
19" rack mountable
Dimensions XRHV02-PS [mm] 483 x 88 x 420 (W x H x D), 19" rack mountable
Weight (approx.) 10 kg


Supply voltage 85 - 260 VAC, 50-60 Hz,
Output voltage range Vo 0 - 15 kV
Output current range Io 0 - 100 mA
Max output power 1.5 kW
Polarity negative
Remote control via indirect coupled analogue I/O (male D-SUB 9)
set and monitor 0 - 5 V
Protection over load and short circuit, voltage supply and temperature
Dimensions 483 × 88 × 420 mm (W×H×D), 19″ rack mountable
Weight (approx.) 6.5 kg

XREC20 electronic set dedicated for full control of the SAX X-ray sources.

The XREC20 set comprises 2 units for full control of the SAX X-ray Sources: XREC20-I emission controller and XRHV02-PS high voltage power supply.

The XREC20-I unit controls the emission current of the X-ray source and also the XRHV02-PS high voltage power supply, displaying both the high voltage and emission current on a single display. Unit allows measurement of working time and anode power. The X-ray source electronics set has both operational and standby modes, guaranteeing the most accurate and stable emission at the start of an experiment. Easy firmware update via USB port (XREC20-I). Unit can be remotely controlled via RS232/485 or Ethernet interfaces. Autosave function (XREC20-I unit) for saving your parameters/unit preset and applying them automatically after restart.

Download brochure


this site uses cookie files.

We use information saved in cookie files, among others, in statistical purposes and in order to fit the service to individual needs of the user. In your browser you can change your cookie files settings.

Using the site without changing cookie files settings means they will be saved in device memory. More information with tips how to change settings can be found in Privacy policy.


Query list