Power supplies & heating controllers

Research Unit Digital Instrument RUDI-EA2

Research Unit Digital Instrument RUDI-EA2

Technical data

Power supply 110-260 V 50/60 Hz, max. 200 VA, depends on modules number
Maximum number of modules in 9U rack 28 of all modules chosen from DAC and HV
High voltage modules Different version up to 6 kV, bipolar, floating output
DAC modules High precision 16 bit +/-12.5 V
Insulation All HV and DAC modules have full insulation 6 kV to power and ground
Temperature stability  < 0.5 ppm/°C for all modules
External interlock active when the contact is closed
Communication interface MODBUS-TCP 460 Kbit/s
Rack dimensions 483 x 395 x 360 mm (W x H x D), rack 9U height, 84Hp width
Weight (approx.) 18 kg (for ~20 modules)

 
High voltage modules

Modules Output voltage Maximum output current
HV 100V  ~0 – 100 V, 16 bit, step size ~1.6 mV  ~600 µA
HV 600V  ~0 – 600 V, 16 bit, step size ~9.2 mV  ~300 µA
HV 600/100V Low range ~0 – 100 V, 16 bit, step size ~1.6 mV
High range ~0 – 600 V, 16 bit, step size ~9.2 mV
 ~300 µA
HV 1900/100V Low range ~0 – 100 V, 16 bit, step size ~1.6 mV
High range ~0 – 1900 V, 16 bit, step size ~23 mV
 ~200 µA
HV 2200V  ~0 – 2200 V, 16 bit, step size ~34 mV  ~150 µA
HV 4000V  ~0 – 4000 V, 16 bit, step size ~61 mV  ~100 µA
HV 6000/600V Low range ~0 – 600 V, 16 bit, step size ~9.2 mV
High range ~0 – 6000 V, 16 bit, step size ~92 mV
 ~100 µA

 
DAC modules

Output voltage  0… +/- 12.5 V
Precision 16 bit
Step size 200 µV
Protection Surge protection 23 kV

Novel, modular high voltage power supply for photoemission and other demanding research applications.

The electronics features fully calibrated, independently operating modules utilising the very latest electronics and software technology. Voltage supplies are controlled by high precision 16-bit digital-to-analog converters with high linearity and extremely high temperature stability. Automatic low and high voltage range settings, as well as output polarity, are under full user control.

The combined high specifiation and system flexibility makes RUDI-EA2 the obvious choice for many analysis applications, where stable, high voltage supplies are required and can also be readily configured by the end user.

Each RUDI-EA2 unit is supplied with a comprehensive serial communication protocol description which can be easily implemented for individual control needs, thus removing the reliance on specific, often prohibitive supplier software.

As the demand for smarter, connected technologies increases, PREVAC provides the best in class electronic solutions. The electronic mainboard of the RUDI-EA2 system is a showcase for the best in active digital and analog electronic components currently on the market.

Features:
▪ Special techniques have been used to achieve rapid temperature stabilization. The system is ready for use after only 3 minutes from switch on.
▪ Each independent voltage module achieves temperature stability below 0.5 ppm of the voltage span per degree Celcius.
▪ Using 16bit AD converters, the 6 kV power supplies can be set with a resolution of just 92 mV and with a maximum noise level of only 200 µVp-p.
▪ Each modules can be controlled independently via MODBUS-TCP 460 Kbit/s wire interface.
▪ Each module has a floating output which means a wide range of configurations are possible making the unit truly universal - serial configuration is unlimited.

▪ Any other voltages up to 6000 V available on request
▪ High linearity controlled with an accuracy of  16 bits
▪ Up to 28 modules fit into 9U rack
▪ Voltage deviation calculated with two-point calibration at min and max voltage

Download RUDI EA2 brochure
Download Metrisi (RUDI EA2/SPECTRIUM) brochure

 

Related products

» Components

Hemispherical Energy Analyser EA15

» Hemispherical Energy Analyser EA15

The EA15 provides high-resolution PES measurements with a 150 mm mean radius analyser.

read more
See more  ›

» Software

Spectrium

» Spectrium

PREVAC acquisition and analyser control software.

read more
See more  ›

TOP

Important:
this site uses cookie files.

We use information saved in cookie files, among others, in statistical purposes and in order to fit the service to individual needs of the user. In your browser you can change your cookie files settings.

Using the site without changing cookie files settings means they will be saved in device memory. More information with tips how to change settings can be found in Privacy policy.

Close

Query list

Ask